Impeller-less mixing/defoaming mixer Uni-cyclone UM-113S

Product Information

The most suitable for mixing and defoaming of small volume paste.

Used for mixing various paste such as silver epoxy, adhesive, encapsulant, various epoxy, etc.

Mixing and defoaming high-viscosity paste.
The centrifugal rotation contribute to remove the bubbles and air inside of paste.
Flexible programming enabled with PC management software.
Mixing capability: Net80g/120ml container can be mixed.

The PC management software is attached to the mixer as standard. The mixing time and mixing speed can be freely set and managed according to the material to be mixed.

The mixing program can be easily managed.

The rotation speed can be graphically checked.

Semiconductor materials
LED materials
Cosmetics bases
Medical materials
Dental materials
Adhesives
Liquid crystal materials
Silver pastes
Solder pastes
Paints
Foods

Specification
Model	UM-113S
Application	Mixing and defoaming of different materials
Series	Uni-cyclone
Method	Self/Centrifugal rotation method
Timer setting	0 sec to 99 min 50 sec(*Note 1)
Centrifugal rotation speed	100 to 2000 rpm (*Note 2)
Self-rotation speed	25% of centrifugal rotation
Memory	10 (*Note3)
Mixing weight (NET)	NET80g×1cup 120ml = Gross 130g
Container	Standard 120ml cup (NET80g) Diameter 74?×Height37?
Safety function	Door sensor, vibration sensor, rotation sensor, an emergency stop switch
Operating ambient environment	5 to 35oC, 35 to 85%RH (without condensation)
Power supply	Single-phase 100 to 120 VAC or 220 to 230 VAC, 50/60 Hz
External dimensions (mm)	280(W) × 280(D) × 410 (H) ?
Weight of the main unit (Kg)	Approx. 21Kg

(*Note 1)

When a PC is used, the timer can be set to 48 hours or more.

(*Note 2)

The specified rotation speed may not be attained depending on the mixing material type, weight, viscosity, etc.

(*Note 3)

The memory is unlimited by using a PC.

Product Enquiry