The grip rings hold elastic film, cloth, and paper taut between their inner and outer rings. The rings are easy to remove and are reusable.
Uses
|
|
1 |
Wafer expansion after dicing
|
2 |
Substitute for metal dicing frames
|
3 |
Wafer/film attachment jig
|
4 |
Others
|
Inner ring ID/OD | Outer ring ID/OD | |
GR-4 | 140mm / 146mm | 146mm / 152mm |
GR-5 | 170mm / 178mm | 178mm / 186mm |
GR-6 | 195mm / 203mm | 203mm / 210mm |
GR-8 | 227mm / 237mm | 237mm / 247mm |
Technovision grip rings are bidirectional rings that can be applied in either direction, thus providing the following advantages.
Advantages
These grip rings are the only ones available that can be applied in either direction.
Even in an assembly process involving heavy use of grip rings, these rings relieve operators of the need to perform time-consuming and troublesome direction checks.
This in turn relieves them of pain in their hands and fingers, significantly improving their work efficiency.
Advantages
|
|
1 |
Prevents tapes and films from tearing or breaking.
|
2 |
Eliminates the need to check the direction of the grip ring.
|
3 |
Allows even unskilled operators to do work safely.
|
4 |
The rings have no sharp edges that would hurt hands or fingers.
|
5 |
Further prevent tapes and films from tearing or breaking by eliminating projections (gate) caused by plastic injection.
|